Eicher's Pro Vinyl installs metal roofing in Pembroke, GA with a 40-year manufacturer warranty, grade 1 Galvalume steel, and installations handled entirely by our own employees, never subcontractors. If you have watched asphalt shingles buckle and blister through another Bryan County summer, where cooling degree days push past 2,500 and the termite pressure is rated Very Heavy, it is worth asking whether a tougher roof would serve you better. We have been answering that question for homeowners across southeast Georgia since 1998.

Is Your Roof Holding Up Against Pembroke's Termite Risk and Tree Canopy?

Bryan County carries a Very Heavy termite risk rating, and that is not a small detail when it comes to roofing. Wood decking softened by moisture and termite activity creates the kind of substrate failures that send shingles lifting in the first real windstorm. Pembroke’s normal tree canopy adds to the problem: leaf debris holds moisture against roofing surfaces, accelerating decay in organic materials. Metal roofing in Pembroke, GA sidesteps most of that cycle because steel simply does not feed termites or rot.

Our Galvalume-coated steel substrate is certified by the Metal Construction Association and protected by an aluminum, zinc, and silicone anti-corrosion coating. That combination virtually eliminates rust and corrosion even when leaves pile against a valley or a branch scrapes the surface during a storm. The roof stays structurally sound without the annual patching routine that wood-backed asphalt systems often require in this part of Georgia.

• Galvalume grade 1 steel resists the moisture cycling common under heavy tree canopy
• Lifetime screws are used on every installation, so fasteners do not back out over time
• Non-organic surface gives termites nothing to tunnel through
• Available in standing seam or standard panel profiles to match your home’s style

If you are in the 31313 zip code or anywhere else around Pembroke, the combination of termite pressure and canopy shade makes the long-term case for metal much stronger than it might look on the sticker price alone.

What Hardiness Zone 9a Means for Your Roof and Your Energy Bills

Pembroke sits in USDA Hardiness Zone 9a, which means winter lows in the 20 to 25 degree Fahrenheit range and summers that regularly push average highs to nearly 90 degrees. That wide swing puts serious stress on roofing materials. Asphalt shingles expand and contract with every temperature cycle, and after enough seasons the granules shed, the tabs crack, and you are back on a ladder or calling a roofer.

Metal handles that thermal cycling better by design. Our panels are installed with fastener systems that allow for controlled expansion, so the roof moves with the temperature rather than fighting it. On the cooling side, reflective Galvalume coatings bounce back solar heat instead of absorbing it, which can meaningfully reduce attic temperatures during the long Pembroke summers when your air conditioner is already working hard against those 2,568 cooling degree days.

• Reflective steel surface reduces attic heat gain compared to dark asphalt
• Controlled-expansion fastening prevents panel distortion through seasonal swings
• Zone 9a freeze-thaw cycles are far less damaging to metal than to granule-surfaced shingles
• Energy savings compound over the 40-year warranty period

For a county where homeownership rates sit at nearly 73 percent and median home values have climbed to around $243,800, protecting that investment with a roof built for this climate just makes practical sense.

Wind Ratings Matter When You Are 67 Miles from the Coast

Pembroke is close enough to the Georgia coast at 67.3 miles out to see moderate hurricane exposure when a storm tracks inland from Savannah or Brunswick. Wind gusts recorded in this corridor can reach 44 miles per hour in routine weather events, and tropical systems push well beyond that. Our metal roofing systems are engineered to meet the toughest wind, fire, and impact codes in the country, which is exactly the kind of specification you want on a home in Bryan County.

We install using lifetime screws and proper panel overlap techniques so that wind cannot find a leading edge to grab. Standing seam panels, where the fastener is completely concealed beneath the seam, offer an especially clean wind profile because there are no exposed screw heads to back out under uplift pressure. Whether you are in Pembroke proper or out toward Fort Stewart, about 18 miles away, the wind load requirements in this region are real, and the roof you put on should be built to handle them.

• Meets national wind, fire, and impact code standards
• Standing seam option provides concealed fastening for superior wind resistance
• Galvalume coating holds up where salt-laden coastal air occasionally reaches inland

A 40-year manufacturer warranty backs every metal roof we install, and our own 5-year workmanship warranty covers the labor side, so you are protected on both ends.

Financing a Metal Roof Without Draining Your Savings

Metal roofing is a longer-term investment than asphalt, and we understand that the upfront number can give homeowners pause. That is why we offer 100 percent financing with no money down. You can choose from 5-year, 7-year, or 10-year loan terms, or take advantage of our 1-year same-as-cash option if you plan to pay it off quickly. There is no pressure to pick a plan on the spot. We come to your home, measure the job, walk you through the options, and leave the decision entirely with you.

We also offer military and senior citizen discounts, which matters in a community like Pembroke where Fort Stewart is just 18 miles down the road and a meaningful portion of Bryan County residents have served or are currently serving. Bring it up when you call and we will make sure the discount is applied before any paperwork is signed.

• 100% financing available, no money down required
• 5, 7, and 10-year loan terms plus 1-year same-as-cash
• Military and senior citizen discounts available
• Free in-home estimate with no obligation to buy

Our showroom is at 341 Cameron Rd in Jesup, about 30 miles from Pembroke, and we have a second location in Brunswick if that is more convenient. But most conversations start with a phone call or an in-home visit, so you do not need to make a trip to get the process moving.

Every Installation Done by Eicher's Employees, Not Subcontractors

One of the most common frustrations homeowners describe after a roofing project is that the crew who showed up was not the company they hired. That does not happen with us. Every metal roof we install in Pembroke, GA is put on by Eicher’s Pro Vinyl employees, people who have been trained to our standards and who answer to us directly. That matters for quality control, and it matters for accountability when the job is done.

We have been doing exterior remodeling in southeast Georgia since 1998, 27 years of work in this climate, on homes like yours. We are licensed and insured in Georgia, and both our workmanship warranty and manufacturer warranty are transferable details that can actually add value if you ever sell your home. A buyer who sees a 40-year metal roof with remaining warranty coverage is looking at a measurable asset, not a liability.

• All installations by Eicher’s own trained employees
• Licensed and insured in Georgia
• 5-year workmanship warranty on labor
• 40-year manufacturer warranty on materials
• Family-owned and operated since 1998

From Pembroke to nearby Claxton, Brooklet, and Guyton, we have built a reputation across Bryan and surrounding counties by doing the work ourselves and standing behind it.

Call Eicher's Pro Vinyl at (912) 588-0061 to schedule your free in-home estimate and find out exactly what a 40-year metal roof would cost for your Pembroke home. No pressure, no obligation, just straight answers from a team that has been doing this work in southeast Georgia since 1998!